If your home is equipped with a septic tank, it can easily be among the most important parts of your plumbing system. However, those that are new to being homeowners or those that have never given much thought to these systems may not be aware of the work that can go into maintaining and repairing these systems.
Why Would Your Septic Tank Need An Inspection?
When your septic system is experiencing problems, it can be necessary to have it professionally inspected. Problems that result in water pooling in the yard near the septic tank can likely indicate that a leak is present and inspection will be needed to confirm it. During this process, a contractor will fully drain the septic tank so that the interior walls can be evaluated for damage. For steel septic tanks, this damage will often be in the form of corrosion or punctures. Concrete tanks are more likely to experience cracking. When these issues are discovered, repaired will need to be made as soon as possible to avoid accidental contamination of your yard and nearby drinking water sources.
How Is A Compromised Septic Tank Repaired?
The process of repairing a damaged septic tank will vary depending on the material that was used in it. When the tank is made of concrete, it may be possible to repair minor cracks that have not fully penetrated the wall. Steel can be more difficult to repair as it will be necessary to weld a patch over the damaged area of the tank. While both of these options can provide lasting repairs, there are limits to the damages that can be repaired. If the damage is too severe to patch, replacing the tank will be the most practical repair solution.
What Is Involved With Replacing A Septic Tank?
Replacing a septic tank is a fairly major task to need to be done as it will involve excavating a large amount of soil from the yard so that the tank can be lifted out of position. If the old tank was made of steel, the new one will be placed as a single unit. This can greatly reduce the repair time as the contractor will simply need to lower the new steel tank into position. However, if you are replacing or installing a concrete a tank, the contractors will install the new tank by placing a series of concrete walls in the ground. An industrial grade sealant will be used to close any small gaps that may have formed between the sections of the tank during the installation.
Contact a contractor, like Martin Septic Service Inc, for more help.